Nuff

Thursday, May 20, 2010

Display default route


Display default route

Following three-command display the current routing table:
# route
Destination Gateway Genmask Flags Metric Ref Use Iface60.49.199.72 * 255.255.255.248 U 0 0 0 eth0172.16.163.0 172.16.160.1 255.255.255.0 UG 0 0 0 eth1172.16.162.0 172.16.160.1 255.255.255.0 UG 0 0 0 eth1172.16.161.0 172.16.160.1 255.255.255.0 UG 0 0 0 eth1172.16.160.0 * 255.255.255.0 U 0 0 0 eth1172.16.167.0 172.16.160.1 255.255.255.0 UG 0 0 0 eth1172.16.165.0 172.16.160.1 255.255.255.0 UG 0 0 0 eth1172.16.164.0 172.16.160.1 255.255.255.0 UG 0 0 0 eth1172.16.170.0 172.16.160.1 255.255.255.0 UG 0 0 0 eth1172.16.169.0 172.16.160.1 255.255.255.0 UG 0 0 0 eth1172.16.168.0 172.16.160.1 255.255.255.0 UG 0 0 0 eth1link-local * 255.255.0.0 U 0 0 0 eth1default home.gateway 0.0.0.0 UG 0 0 0 eth0

1. Display or view routing table.
2. Add or change default route.
3. Add static route.
4. Add permanent (persistent) static routing.

route add default gw 10.10.0.1 eth0

No comments: